An Introduction To Ductless Air Conditioners For Your San Marcos Home

An air conditioning system, which is usually called Air Conditioner (in the United States and Canada), or an air-con (in Britain and Australia), is generally a gadget that uses a refrigeration system to drain out heat from a specific location. The HVAC is the full system, which has an all rounded mechanism for heating, ventilating and air conditioning.
This sort of cooling certainly has numerous benefits, however the problem is that it could stretch your utility costs, compel you to maintain yourself inside your San Marcos home, cause a lot of noise and could also make you ill. Some difficulties can additionally emerge if your a/c is not effectively set up, or is not adequately kept. The most awful mistake that individuals make is to remaining their doors and windows open while their you air conditioner is on. Well, discarding your equipment is no option to these problems, as you should just be depriving yourself of the comfort of your areas. Why don’t you try the latest cooling modern technology rather?
The Ductless Split Air Conditioners are just what you should meet your cooling and heating issues.
This device has an evaporator, which could be put up inside in an appealing space-economic closet. This evaporator has to be joined with cooling agent or coolant pipes, to an exterior device, practically called a condenser. The procedure is as straightforward as the installation! No dangerous ductwork enters into the scene, and you could also conserve very a bunch of cash on your power bills. This a/c is actually room saving therefore does not conflict with your interior designs. The interior device is specifically created to ensure a complete noise totally free air conditioning that does not compromise the energy effectiveness. The rotary compressors produce the lowest quantity of sound and assure an exceptional air conditioning at the very same time!
Ductless a/c unit are the most amazing option for those cases where ductwork comes to be also expensive, or is as well bothersome. The reliable indoor air handler and the outside condenser are matched perfectly making setup truly easy.

Tips For Selecting A Vista Air conditioning Specialist

It’s simple to take modern indoor heating and cooling systems for provided. However the truth is these units maintain us comfortable and satisfied all year long. That’s why National Indoor Comfort Week, April 23 to 29, has actually been alloted to identify heating, ventilating and a/c (HVAC) service providers and the essential job they perform to guarantee our home and workplace are comfortable.
One of the most important part of preparing your Vista home‘s air conditioning system for warm weather condition could be picking a certified service provider who is educated to sustain, repair work and/or replace the components of your system.
To assist you pick a dealer who is accredited in Heating and Air Conditioning, and that can skillfully service your cooling system, the professionals at Coleman ® Heating and Air Conditioning, a brand name of the Unitary Products Group of York-a Johnson Controls Company-offer these recommendations:
1. Educate yourself about HVAC systems. You can discover this details in on the internet resources and dealer and supplier Web sites. Recognizing the essentials can help you when speaking with a potential service provider.
2. Ask close friends, co-workers, realty representatives and home enhancement professionals for recommendations. Ads can additionally route you to a specialist.
3. When speaking with a potential dealer, look for membership in expert organizations, such as NATE (North American Technician Excellence) and ACCA (Air Conditioning Contractors of America).
4. Ask to see state and neighborhood licenses, certification for refrigerant handling, and evidence of obligation and worker’s payment insurance policy. Be specific these documents put on the professional, as well as any professionals or subcontractors the specialist utilizes.
5. Research the variety of solutions a service provider provides. Does the checklist for example scheduled maintenance, repair works and 24-hour service?
6. Consider the variety of years a contractor has been in business. In a lot of cases, a reputation for high quality, integrity and reliability expands with the length of service to a neighborhood.
A great HVAC contractor will certainly see your home to carry out an on-site inspection and ask inquiries concerning your cooling requirements and issues, prior to making any tools or solution referrals.
7.  Ask for and check recommendations. Consider them together with other info you have actually gathered in your study.
By complying with these straightforward pointers, you will certainly more than likely find the contractor who ideal satisfies your needs, both in terms of technological experience and professional honesty.

Types of Fallbrook HVAC Systems – part 3

This is a 3-part article. Please read the other parts of this article by clicking the links below:
Types of Fallbrook HVAC Systems – part 1
Types of Fallbrook HVAC Systems – part 2
Retrofit Options
Maybe you don’t need to replace that Fallbrook heating or cooling system, and can get by with a key fix-it or two. There are plenty of possibilities that are inexpensive and can save you some money.
In gas- and oil-fired boilers or furnaces, adding a vent damper closes off air loss up a chimney when the boiler or furnace is not running. When not needed, intermittent ignition devices turn off pilot lights in older systems. Reducing the size of the gas burner orifice or nozzle in oil-fired systems, or the baffles in a gas-fired system, can effectively downsize or derate an oversized system.
Excess radiators can be eliminated as well. Modulating aquastats for hot water boilers adjust the hot water temperature to the outside temps and can save 10 percent in fuel costs. And a time-delay relay for hot-water boilers causes hot water to circulate through the system without firing the boiler. An oil-fired system can also benefit from a barometric flue damper that prevents too much heat from going up a chimney. The Department of Energy offers more details on gas and oil system retrofit options.
In these cases, adding a dehumidifying heat pipe can help. The process by which they work is a bit complicated, but they can be retrofitted to most air conditioning systems and heat pumps. They’re typically located on either side of the air conditioner’s evaporator coil.
If you have an old, inefficient burner on an oil boiler, though, you may want to replace the whole burner. A flame retention burner will block airflow up the chimney when the unit isn’t running, saving up to 20 percent on fuel costs at a cost of about $500, says the DOE.
For air conditioning systems, if you have an older central air conditioner, you might choose to replace the outdoor compressor with a modern, high-efficiency unit. Consult a local heating and cooling contractor to assure that the new compressor is properly matched to the indoor unit if you do so. Air conditioning systems naturally dehumidify the air as they cool your Fallbrook home, but may not be able to keep up with the humidity in some very humid climates.
With these systems you can automatically control the humidity levels in a home as you heat and cool, though this is not available through forced-water heating systems that use boilers. With humidity/dehumidification systems built into your furnace or air conditioning, you can not control the humidity levels when the system is not on. Most central air conditioning systems in homes are split systems.
Reducing the size of the gas burner orifice or nozzle in oil-fired systems, or the baffles in a gas-fired system, can effectively downsize or derate an oversized system.
Air conditioning systems naturally dehumidify the air as they cool your home, but may not be able to keep up with the humidity in some very humid climates.

Types of Fallbrook HVAC Systems – part 2

This is a 3-part article. Please read the other parts of this article by clicking the links below:
Types of Fallbrook HVAC Systems – part 1
Types of Fallbrook HVAC Systems – part 3
Heating Systems
According to the U.S. Department of Energy, modern conventional heating systems can achieve efficiencies as high as 97 percent, converting nearly all the fuel to useful heat for your home.
Heating units can be categorized into furnaces that provide heated air through ductwork, which is a popular type of heating system in the United States such as boilers that heat water for steam radiators or forced-water systems with baseboard radiators, electric heat and heat pumps. Furnaces generally use natural gas or propane for fuel, while boilers can use gas or oil.
Seek Annual Fuel Utilization Efficiency (AFUE) ratings (efficiency percentage) in the 80s and 90s. The national minimum for furnaces in the United States is 78 percent. Look for Energy Star-certified systems that are more energy-efficient, and consider sealed and combustion units that bring outside air directly into the burner and exhaust directly to the outside. These are the most efficient systems and do not pose a risk of backdrafting combustion gases.
All-electric furnaces have AFUE ratings of 95 percent to 100 percent, but they are not economical is many parts of the country. You can also consider electric heat pumps to heat or cool parts or all of your Fallbrook home. Some heat pumps can be added onto furnaces as well, to help use less gas or propane.
Radiant floors, or hydronic heating systems, often use piping under a floor. Radiant systems are much more effective if built into a concrete floor, which will retain the heat and release it slowly.
Cooling Systems
Fallbrook Air conditioning systems today come in several different sizes and types, and what you decide to add or upgrade in your home depends on the systems you already have, as well as the climate.
If you live in the south, you’ll probably want a central or whole-house air conditioning system. Northern habitants may opt for portable window units that can be placed inside a window for a few months of the year. And many in between can opt for systems like ductless mini-splits that are part inside and part outside of the home.
Today’s best air conditioners use 30 percent to 50 percent less energy to produce the same amount of cooling as air conditioners made in the mid-1970s. Even if your air conditioner is only 10 years old, you may save 20 percent to 40 percent of your cooling energy costs by replacing it with a newer, more efficient model.
The most generally known efficiency rating is Seasonal Energy Efficiency Rating (SEER). SEER 13 is the minimum efficiency you should consider, but higher efficiencies are likely to be cost effective. Some central air systems have SEERs of 16. In hot, dry climates you should look at the Energy Efficiency Rating (EER), which denotes how well the system will work at peak conditions. Also look for Energy Star-rated systems for the best energy efficiency.
Air conditioners have three important parts that include a compressor, a condenser, and an evaporator. The compressor and condenser are normally located on the outside part of the air conditioner while the evaporator is located on the inside. Most central air conditioning systems in homes are split systems.
Many today use for ductless mini-split systems, which can be installed by do-it-yourselfers, though it is a moderately difficult project, as interior and exterior units must be installed and both refrigerant and condensation lines must be run between the two elements. These systems can run $1,500 to $2,000 per ton, according to the U.S. Department of Energy.
Some in non-humid but hot climates like the southwest use evaporative coolers, also called swamp coolers, that cool outdoor air by passing it over water-saturated pads, causing the water to evaporate into it. The cooler air is then directed into the home, and pushes warmer air out through open windows.Room air conditioners that fit into windows or can be installed in walls are good options for cooling selected spaces.
Proper sizing is very important for efficient air conditioning. Because a unit that is too large will not cool an area uniformly, a bigger unit is not necessarily better. A small unit running for an extended period operates more efficiently and is more effective at dehumidifying than a large unit that cycles on and off too frequently.
Based on size alone, an air conditioner generally needs 20 British thermal units (Btu) for each square foot of living space. Other important factors to consider when selecting an air conditioner are room height, local climate, shading, and window size. Also look for a filter that slides out easily for regular cleaning, logically arranged controls, a digital readout for the thermostat setting, a built-in timer, and an Energy Star-rating for efficiency. Replacing an older unit with an EER rating of 5 with one with an EER of 10 can cut your energy costs in half, according to the DOE.

Types of Fallbrook HVAC Systems

This is a 3-part article. Please read the other parts of this article by clicking the links below:
Types of Fallbrook HVAC Systems – part 2
Types of Fallbrook HVAC Systems – part 3
Split systems, boilers, furnaces and mini-splits are just a few of the choices for your home.
If you’ve done an energy efficiency assessment of your home, maybe had some additional insulation installed, and you’re hiring a heating or cooling systems professional then now’s the time to decide on the right Fallbrook HVAC system for your home.
Newer systems today provide many more options, such as variable fan speeds and multiple stages of heating and cooling.
Single or Multi-Stage?
Single-stage heating and cooling is popular in colder winter climates and humid and hot areas, respectfully, because the systems are set to provide comfort for the coldest or warmest days of the year. That also means that a great majority of the time, these heating systems or air conditioners are operating at full capacity when they don’t need to be. That’s where a multi-stage system comes in handy and can save you energy and money.
You can get a single-stage system with variable fan speeds to create a variable air flow, says Donald Prather technical services manager for the Air Conditioning Contractors of America(ACCA). Though that variation is limited, he stresses. You may not experience much of a difference, because the heating or cooling unit is still working at its maximum output.
Zoned Systems
Zoned HVAC systems can heat or cool individual areas of your Fallbrook home by controlling zone valves or zone dampers inside the vents or ductwork, which selectively block the flow of air. When you need it, zoned systems can save you energy and money by only heating or cooling certain areas.
Humidity Control
Humidifiers and dehumidifiers can be added as options to heating and cooling systems, and if you live in a humid or very dry climate these upgrades should definitely be on your list. About 50 percent relative humidity is considered optimal for humans.
With these systems you can automatically control the humidity levels in a home as you heat and cool, though this is not available through forced-water heating systems that use boilers. With humidity/dehumidification systems built into your furnace or air conditioning, you can not control the humidity levels when the system is not on. You can add separate humidity/dehumification systems that do this if desired.

Environment – Friendly Carlsbad HVAC System

A green energy efficient home will not only reduce the cost of utility bills, but it will greatly enhance the comfort of your home. Many experts agree a geothermal home heating is one of the very efficient and environmentally-friendly ways to heat a home. But when words like “green energy” and “geothermal” make you wonder if you’ve stepped into a sci-fi movie, here’s some information to assist you know what all of it means to you and your house:
What Is Geothermal?
Geothermal literally means “earth heat.” Traditional forced-air systems (like the majority of us have) use the outside air as a platform to heat the house. So, if it’s 10 degrees out the furnace has to heat that 10 degree air around 70 degrees to create it comfortable inside. This, as imaginable, takes lots of energy to do.
A geothermal system, on the other hand, uses the constant, stable temperature of the earth as a platform to heat your home. The earth’s temperature stays at a continuing temperature, usually 45 degrees to 75 degrees, depending on your own latitude. Because the temperature of the earth is significantly higher than the outside air, it takes a lot less energy to get it to 70 degrees.
The machine works together large coils that are buried in the earth. A fluid, usually an assortment of water and anti-freeze, runs through the tubes. That water (which is the same temperature of the earth) is then run during your home. A converter extracts the warmth from the water, and then raises the temperature as to the your thermostat is defined at.
The machine also works in reverse: in the summertime, your geothermal unit can certainly cool your house utilizing the earth’s temperature at a fraction of the cost of your air conditioner.
Now, the expense for installing a geothermal home heating can be pretty steep. You can bank on spending $7,000 to $15,000 for a complete system.
But, here’s what’s promising: depending on your own part of the country, the machine will probably pay for itself in 5-8 years and add significant resale value to your home.
Many experts claim a geothermal system in a 1,500 square foot home will heat and cool your house for $1 per day. And the most effective part is that you’re not using any fossil fuels to heat and cool your home.
Use Geothermal Green Energy for Your Carlsbad Home
The typical lifespan of a geothermal system is finished 20 years. If you invest in a new, traditional heating and cooling system today, you’ll be replacing it again in about 10 years. So, double the purchase price you’d pay now and compare it to the price tag on a geothermal system. It will be very competitive if you should be buying a high-efficiency system.
Does the thought of a geothermal home heating spark your interest? Call your Carlsbad HVAC professional to answer your geothermal, green energy questions and evaluate whether it may be a fit for your house or business.

10 Important Things To Do Before Buying a Home

We ran across this home buying article recently and thought it would be a good share here to Carlsbad and surrounding area residents thinking of buying a new home.
We’ve learned the hard way that there are some very important things that should be checked before signing the papers to buy a new home. Of course, you’ll have a professional do an inspection and look over the place to make sure the home is termite and flood damage free, but these 10 things fall into a different category; the immediate to-do list, which is something you may not want to be adding to right now.
Even though there will always be cosmetic changes to make to a new home, trying to avoid costly repairs upon first moving in is always wise. Being able to save that money for the dining table of your dreams (or simply for gas and groceries!) is a big deal. Here’s a few things we suggest checking before you sign the papers and inherit all of the previous tenants past problems.
1. Check The Drains: This might sound silly, but we’ve had two homes with the same issues in the last several years. Somewhere between the house and the sewer line, there’s a backup. Usually tree branches or a collapsed pipe, but either way, it’s hard to spot unless you run a load of laundry, fill up the tub and sinks and let them all attempt to drain at the same time.
2. Open All The Windows: Replacing windows isn’t fun and it isn’t cheap either. Open them all to find out if they stick, are stuck or just plain old won’t open.
3. Turn On All The Faucets: Although changing out faucets isn’t exactly rocket science it’s always a pain to lay under a cabinet and reach for the sky with funny tools to get things removed. Just check to make sure they all work before buying to eliminate the back ache.
4. Light A Fire In The Fireplace: Even though chimneys are usually installed by professionals, that doesn’t mean they’re always in pristine shape. Cleaning them is as simple as a phone call to a local chimney sweep, but finding out if all the fireplaces in the home draft correctly is another.
5. Taste The Water: This lesson is always learned the hard way. Even if your city has great water, your pipes might be old enough that they’ll send a little extra something out of the tap and into your glass. Knowing up front if you’ll need to install a whole house filter or invest in a few Brita pitchers is always helpful.
6. Flush The Toilets: Knowing that all the toilets in the home can handle toilet paper is a bonus. Although they’re easy enough to replace or fix, finding ones that flush well are a bonus. If you’re dissatisfied they could issue you money back to make the replacement in order to get you to sign on the dotted line!
7. Open The Electrical Panel: A clean and labeled panel is a happy panel. Something that looks like squirrels got up inside can signal trouble. Look for loose wires or ones that simply don’t connect to anything. It could signal that there’s live wires inside the walls!
8. Turn On The Heat/Air: Knowing that both of these things work prior to actually needing them can be a serious bonus. Check to make sure they blow their respective temperatures in addition to just turning on.
9. Pull The Carpet Back: Before you move in, you’ll want to find out if there’s hardwood floors and also any mold or mildew under the carpets. Look for the lowest side of the room and if possible pull a corner back. Many homeowners will have a section of carpet removed in a closet to allow you to see the condition of the floors below.
10. Basement Moisture: Although most home inspectors will sniff this one out for you, look for signs of dampness. Even if the walls aren’t apparently wet, look for things like dehumidifiers, bucks of silica or other things that grab moisture from the air and keep it at bay. If the home owners are smart enough to move these things, look for places near outlets that look clean (or leave a dust ring) where something like this might have sat.